Download PassLeader Free 70-342 Dumps with VCE and PDF (Question 41 – Question 60)

Valid 70-342 Dumps shared by PassLeader for Helping Passing 70-342 Exam! PassLeader now offer the newest 70-342 VCE dumps and 70-342 PDF dumps, the PassLeader 70-342 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader 70-342 dumps with VCE and PDF here: http://www.passleader.com/70-342.html (231 Q&As Dumps)

BTW, DOWNLOAD part of PassLeader 70-342 dumps from Cloud Storage: https://drive.google.com/open?id=0B-ob6L_QjGLpfnExREVzWWtnTGZYZDhiVm1ESjV2dkgwU09EOExRMloxUE95aUdnWC1lUU0

QUESTION 41
You are evaluating the deployment of two additional Client Access servers and a hardware load balancer in the London office. You need to recommend changes to the Client Access namespace design to meet the site resiliency requirements. Which three actions should you recommend? (Each correct answer presents part of the solution. Choose three.)

A.    In the London office, set mail.proseware.com as the external host name for Outlook Anywhere.
In the New York office, set mail.proseware.com as the external host name for Outlook Anywhere.
B.    In the London office, set ionmail.proseware.com as the internal host name for Outlook Anywhere.
In the New York office, set nycmail.proseware.com as the internal host name for Outlook Anywhere.
C.    Use DNS round robin for the external host name for Outlook Anywhere.
D.    Use DNS round robin for the internal host name for Outlook Anywhere.
E.    In the London office, set nycmail.proseware.com as the external host name for Outlook Anywhere.
In the New York office, set ionmail.proseware.com as the external host name for Outlook Anywhere.
F.    In the London office, set mail.proseware.com as the internal host name for Outlook Anywhere.
In the New York office, set mail.proseware.com as the internal host name for Outlook Anywhere.

Answer: ABC
Explanation:
A:
Use mail.proseware.com as the external host name for Outlook Anywhere at both locations.
B:
Use internal names (lonmail.proseware.com and nycmail.proseware.com) as the internal host name for Outlook Anywhere in London and New York respectively.
C:
To meet the resiliency requirement use the external host name (mail.proseware.com) for DNS round robin for Outlook anywhere.
* From scenario:
– Users connect to mail.proseware.com for Microsoft Outlook and Outlook Web App services. Mail.proseware.com resolves to an IP address on a hardware load balancer.
– All Outlook Anywhere users are enabled for Cached Exchange Mode.
– Proseware has two main offices located in New York and London.
Site Resiliency Requirements:
– All mailboxes must be available if a single site becomes unavailable. The solution must not require administrator intervention.
– User traffic on the WAN links must be minimized.
* Split DNS for Exchange Server 2013:
Split DNS allows your internal clients to receive a different answer to their DNS lookups than an external client would receive. In effect you have your Exchange namespace hosted on your internal DNS server, with records configured to point to internal IP addresses.

QUESTION 42
You need to recommend a solution to meet the technical requirements for redundancy during email delivery. Which cmdlet should you include in the recommendation?

A.    Set-FrontendTransportService
B.    Set-TransportConfig
C.    Set-MailboxTransportService
D.    Set-TransportService

Answer: B
Explanation:
Internal email messages must be rejected if the messages cannot be protected by using Shadow Redundancy. We need to use the Set-TransportConfig cmdlet with the RejectMessageOnShadowFailure parameter.
passleader-70-342-dumps-421

QUESTION 43
Hotspot Question
You need to recommend which technology can be used to meet each email security requirement. What should you recommend? (To answer, select the appropriate technology for each requirement in the answer area.)
passleader-70-342-dumps-431

Answer:
passleader-70-342-dumps-432
Explanation:
To Encrypt OWA E-mails, S/MIME is required. This is not related to Domain Security.
https://support.quovadisglobal.com/KB/a287/how-do-i-enable-smime-control-to-digital-sign-encrypt.aspx
http://blogs.technet.com/b/mconeill/archive/2013/08/29/outlook-2013-vs-owa-2013.aspx

QUESTION 44
Drag and Drop Question
You need to recommend a solution to support the planned changes for the integration of the Exchange Server organizations of Contoso and Proseware. What should you configure in each organization? (To answer, drag the appropriate objects to the correct forests. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
passleader-70-342-dumps-441

Answer:
passleader-70-342-dumps-442

QUESTION 45
You need to resolve the content filtering issue for the Office 365 pilot users. What should you do?

A.    Run the Set-Mailbox cmdlet and specify the -MaxBiockedSenders and the -MicrosoftOnlineServicesID parameters.
B.    Run the Microsoft Online Services Directory Synchronization Configuration Wizard and select Enable Exchange hybrid deployment.
C.    Modify the default content filter policy from the Office 365 portal.
D.    Run the Set-Mailbox cmdlet and specify the -MaxSafeSenders and the -MicrosoftOnlineServicesID parameters.

Answer: B
Explanation:
* Scenario:
– The pilot users report that entries added to their Safe Senders list and their Blocked Senders list fail to work.
– For the pilot mailboxes, all inbound email messages from the Internet are delivered to the Exchange Server organization, and then forwarded to Office 365.
* Hybrid Configuration wizard Exchange 2013 includes the Hybrid Configuration wizard which provides you with a streamlined process to configure a hybrid deployment between on-premises Exchange and Exchange Online organizations.

QUESTION 46
Hotspot Question
You need to recommend a solution to audit the issue of User1. Which command should you recommend? (To answer, select the appropriate options in the answer area.)
passleader-70-342-dumps-461

Answer:
passleader-70-342-dumps-462
Explanation:
http://technet.microsoft.com/en-us/library/bb123981(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/bb676368(v=exchg.141).aspx

QUESTION 47
You discover that the Large Audience MailTip is not displayed when users compose an email message to the 20 new distribution groups. You need to ensure that the Large Audience MailTip is displayed for the new distribution groups immediately. Which cmdlet should you use?

A.    Set-DistributionGroup
B.    Set-MailboxServer
C.    Set-ClientAccessServer
D.    Start-ManagedFolderAssistant

Answer: B
Explanation:
We need to use the Set-MailboxServer cmdlet with the ForceGroupMetricsGeneration parameter to force a count of the number of members of the distribution groups. The ForceGroupMetricsGeneration parameter specifies that group metrics information must be generated on the Mailbox server regardless of whether that server generates an offline address book (OAB). By default, group metrics are generated only on servers that generate OABs. Group metrics information is used by MailTips to inform senders about how many recipients their messages will be sent to. You need to use this parameter if your organization doesn’t generate OABs and you want the group metrics data to be available.
http://technet.microsoft.com/en-us/library/jj674302(v=exchg.150).aspx

QUESTION 48
Hotspot Question
You need to recommend a solution to audit the issue of User1. Which command should you recommend? (To answer, select the appropriate options in the answer area.)
passleader-70-342-dumps-481

Answer:
passleader-70-342-dumps-482

QUESTION 49
Drag and Drop Question
You have an Exchange Server 2013 organization that has Information Rights Management (IRM) configured. Users report that they cannot apply IRM protection to email messages from Outlook Web App. You verify that the users can protect the messages by using IRM from Microsoft Outlook. You need to recommend a solution to ensure that the users can protect email messages by using IRM from Outlook Web App. Which four actions should you recommend? To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.
passleader-70-342-dumps-491

Answer:
passleader-70-342-dumps-492
Explanation:
Box 1: Create a distribution group named Group1.
Box 2: Add the Microsoft Exchange Federation Mailbox user account to Group1.
Box 3: Enable the super users group and set the group to Group1.
Box 4: Run the Set-IRMConfiguration cmdlet.
Note:
* To enable IRM in Outlook Web App, you must add the Federation mailbox, a system mailbox created by Exchange 2013 Setup, to the super users group in AD RMS.
* Step 1: Use the Shell to add the Federation mailbox to a distribution group If a distribution group has been created and configured as a super users group in the AD RMS cluster, you can add the Exchange 2013 Federation mailbox as a member of that group. If a super users group isn’t configured, you must create a distribution group and add the Federation mailbox as a member.
1. Create a distribution group dedicated for use as an AD RMS super users group.
2. Add the user FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 to the new distribution group.
* Step 2: Use AD RMS to set up a super users group. Perform the following procedure on an AD RMS cluster. The account used to perform this procedure must be a member of the AD RMS Enterprise Administrators local group on the AD RMS server.
1. Open the Active Directory Rights Management Services console and expand the AD RMS cluster.
2. In the console tree, expand Security Policies, and then click Super Users.
3. In the action pane, click Enable Super Users.
4. In the result pane, click Change Super User Group to open the Super Users property sheet.
5. In the Super user group box, type the email address of the distribution group you created in the previous procedure, or click Browse to select a distribution group.
* Information workers increasingly use e-mail to exchange sensitive information. To help secure this information, organizations can use Information Rights Management (IRM) to apply persistent protection to messaging content. Prior to Microsoft Exchange Server 2010, effective use of IRM protection was limited to Outlook clients. In Exchange Server 2007, Microsoft Outlook Web Access users were required to download the Rights Management add-in for Microsoft Internet Explorer so they could access IRM-protected content. In Exchange 2013, IRM in Outlook Web App allows your users to access the rich IRM functionality offered by Exchange to apply persistent IRM-protection to messaging content.
Reference:
– Information Rights Management in Outlook Web App.
– Add the Federation Mailbox to the AD RMS Super Users Group.

QUESTION 50
Contoso, Ltd., and Fabnkam, Inc., are partner companies. Each company has an Exchange Server 2013 organization in a data center that is connected to the Internet. All of the Exchange servers in both of the organizations have the Client Access server role and the Mailbox role installed. The data centers connect to each other by using a redundant high-speed WAN link. The following mail exchanger (MX) records are configured:
– Contoso.com MX 10 mail.contoso.com
– Fabrikam.com MX 10 mail.fabrikam.com
You need to recommend a solution for inbound mail flow. The solution must meet the following requirements:
– Users in both companies must receive email from the Internet if either of the Internet links fails.
– Mail from the Internet to contoso.com must be received by mail.contoso.com if the Internet link at the Contoso data center is available.
– Mail from the Internet to fabrikam.com must be received by mail.fabrikam.com if the Internet link at the Fabrikam data center is available.
Which two actions should you recommend? (Each correct answer presents part of the solution. Choose two.)

A.    Create the following DNS records:
Contoso.com MX 20 mail.fabrikam.com
Fabrikam.com MX 20 mail.contoso.com
B.    Create the following DNS records:
Contoso.com MX 10 mail.fabrikam.com
Fabrikam.com MX 10 mail.contoso.com
C.    For each organization, configure an internal relay domain and a Send connector.
D.    For each organization, configure an external relay domain and a Receive connector.
E.    Create the following DNS records:
Contoso.com MX 5 mail.fabrikam.com
Fabrikam.com MX 5 mail.contoso.com

Answer: AC
Explanation:
A:
Use a priority above 10.
C:
* When you configure an internal relay domain, some or all of the recipients in this domain don’t have mailboxes in this Exchange organization. Mail from the Internet is relayed for this domain through Transport servers in this Exchange organization.
* An organization may have to share the same SMTP address space between two or more different messaging systems. For example, you may have to share the SMTP address space between Exchange and a third-party messaging system, or between Exchange environments that are configured in different Active Directory forests. In these scenarios, users in each email system have the same domain suffix as part of their email addresses. To support these scenarios, you need to create an accepted domain that’s configured as an internal relay domain. You also need to add a Send connector that’s sourced on a Mailbox server and configured to send email to the shared address space. If an accepted domain is configured as authoritative and a recipient isn’t found in Active Directory, a non- delivery report (NDR) is returned to the sender. The accepted domain that’s configured as an internal relay domain first tries to deliver to a recipient in the Exchange organization. If the recipient isn’t found, the message is routed to the Send connector that has the closest address space match.
Incorrect:
D:
When you configure an external relay domain, messages are relayed to an email server that’s outside your Exchange organization and outside the organization’s network perimeter.
http://technet.microsoft.com/en-us/library/bb124423%28v=exchg.150%29.aspx#BKMK_InternalRelayDomains

QUESTION 51
Drag and Drop Question
You have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for client connections. Network2 is used for database replication. Network2 fails. You discover that replication traffic is sent over Network1. You need to ensure that all of the database replication traffic is sent over Network2. The solution must minimize database replication downtime. Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
passleader-70-342-dumps-511

Answer:
passleader-70-342-dumps-512
Explanation:
Box 1: Run the Suspend-MailboxDatabaseCopy cmdlet.
Box 2: Restore the connectivity to Network2.
Box 3: Run the Resume-MailboxDatabaseCopy cmdlet.
Note:
* You may need to suspend or resume a database copy for a variety of reasons, such as maintenance on the disk that contains a database copy, or suspend an individual database copy from activation for disaster recovery purposes. This example suspends continuous replication for a copy of the database DB1 hosted on the server MBX1. An optional comment has also been specified.
Suspend-MailboxDatabaseCopy -Identity DB1\MBX1 -SuspendComment “Maintenance on MBX1” – Confirm:$False
This example resumes a copy of the database DB1 on the server MBX1.
Resume-MailboxDatabaseCopy -Identity DB1\MBX1
Reference:
Suspend or Resume a Mailbox Database Copy

QUESTION 52
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.
passleader-70-342-dumps-521
EX1 and EX2 are members of a database availability group (DAG) named DAG1. You have a database named DB1 that replicates to EX1 and EX2. EX1 fails. You discover that DB1 does not mount on EX2. You view the status of the mailbox databases as shown in the following table.
passleader-70-342-dumps-522
You need to ensure that the database attempts to mount on EX2 if EX1 fails. What should you change?

A.    The AutoDatabaseMountDial setting to Lossless
B.    The AutoDatabaseMountDial setting to BestAvailabilty
C.    The activation preference of DB1\EX2
D.    The activation preference of DB1\EX1

Answer: B
Explanation:
* The MailboxServer.AutoDatabaseMountDial property gets or sets the automatic database mount behavior for an Exchange server that is running the Mailbox server role in a continuous replication environment after a database failover.
* The AutoDatabaseMountDial property specifies the automatic database mount behavior of a Mailbox server after a failover. Each behavior is based on the copy queue length, or the number of logs that are recognized by the passive copy that need to be replicated. If the copy queue length is greater than the value specified for the behavior, the database does not automatically mount. If the copy queue length is less than or equal to the value specified for the behavior, the Mailbox server tries to copy the remaining logs to the passive copy and mounts the database.
* BestAvailability. The database automatically mounts immediately after a failover if the queue length is less than or equal to 12.
Incorrect:
Not A: Lossless. The database does not automatically mount until all logs generated on the active device are copied to the passive device.
http://msdn.microsoft.com/en-us/library/microsoft.exchange.data.directory.management.mailboxserver.autodatabasemountdial%28v=exchg.150%29.aspx

QUESTION 53
Your company has a data center in New York and a data center in Miami. The company has an Exchange Server 2013 organization that contains a database availability group (DAG). The DAG contains servers in both data centers. The company plans to deploy Outlook Anywhere to all users. You configure the following:
– All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com.
– All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com.
– In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:
* A certificate principal name of mail.contoso.com
* Subject alternate names of mail.contoso.com and miami.mail.contoso.com
You need to recommend which task must be performed to meet the following requirements:
– Users always must attempt to connect first to a server in the data center where their mailbox is located.
– Users must be able to access their mailbox if a single data center fails.
What should you recommend?

A.    Change the external host name of the Miami data center to mail.contoso.com.
B.    Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.
C.    Run the Set-OutlookProvider cmdlet.
D.    Run the Add-AvailabilityAddressSpace cmdlet.

Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/bb123683%28v=exchg.150%29.aspx
Use the Set-OutlookProvider cmdlet to set specific global settings using the msExchOutlookProvider attribute on the msExchAutoDiscoverConfig object in Active Directory.
A – wrong, because that would only confuse the DNS resolution and not allow clients to connect to their site.
B – correct, this is the only answer that specifies an external URL specific to each site.
C – wrong, because the Set-OutlookProvider cmdlet is Organization wide and not site-specific.
D – wrong, because this deals with free/busy information and not Outlook Anywhere connectivity.

QUESTION 54
Your company has offices in Tokyo, Bangkok, and Shanghai. All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link. The network contains 10 servers that have Exchange Server 2010 installed. The servers are configured as shown in the following table.
passleader-70-342-dumps-541
You plan to deploy 10 servers that will have Exchange Server 2013 installed. The servers will be configured as shown in the following table.
passleader-70-342-dumps-542
Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers. You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails. Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)

A.    Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.
B.    Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.
C.    Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.
D.    Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.
E.    Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.

Answer: BCE
Explanation:
Note:
* Exchange 2013 Unified Messaging offers administrators:
– A complete voice mail system. Unified Messaging offers a complete voice mail solution using a single store, transport, and directory infrastructure. The store is provided by a Mailbox server and forwarding of incoming calls from a VoIP gateway or IP PBX is handled by a Client Access server.
All email and voice mail messages can be managed from a single management point, using a single administration interface and tool set.
– An Exchange security model. The Microsoft Exchange Unified Messaging service on a Mailbox server and the Microsoft Exchange Unified Messaging Call Router service on a Client Access server run as a single Exchange server account.
Consolidation.
* The client access server (CAS) is a server role that handles all client connections to Exchange Server 2010 and Exchange 2013. The CAS supports all client connections to Exchange Server from Microsoft Outlook and Outlook Web App, as well as ActiveSync applications. The CAS also provides access to free/busy data in Exchange calendars. The CAS is one of five server roles in Exchange Server 2007 and Exchange 2010, and one of two server roles in Exchange Server 2013. It must be installed in every Exchange Server organization and on every Active Directory (AD) site that has the Exchange mailbox server role installed.

QUESTION 55
You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table.
passleader-70-342-dumps-551
You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server. Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.)

A.    EX1
B.    EX2
C.    EX3
D.    EX4
E.    EX5

Answer: CDE
Explanation:
C:
You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010. You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging.
D,E:
* Requirements and Recommendations. Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers.
* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM.
http://technet.microsoft.com/en-us/library/aa996399%28v=exchg.150%29.aspx

QUESTION 56
Drag and Drop Question
You have a server that has Exchange Server 2013 installed. You plan to configure Unified Messaging (UM) to connect to an IP-PBX. A telecommunications administrator configures the following numbers on the IP-PBX:
– First extension number: 12100.
– Last extension number: 12499.
– Help extension number: 12500.
– Incoming pilot number: 12000.
You need to configure UM to support the following requirements:
– Users must be able to use Outlook Voice Access.
– Users must be able to receive voice mail when callers connect to the users’ extension.
– Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus.
Which numbers should you use for the UM configurations? To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
passleader-70-342-dumps-561

Answer:
passleader-70-342-dumps-562
Explanation:
Box 1: 12000
Box 2: 12500
Box 3: 12000
Note:
* An Outlook Voice Access number lets a user who is enabled for Unified Messaging (UM) and voice mail access their mailbox using Outlook Voice Access. When you configure an Outlook Voice Access or subscriber access number on a dial plan, UM-enabled users can call in to the number, sign in to their mailbox, and access their email, voice mail, calendar, and personal contact information. By default, when you create a UM dial plan, an Outlook Voice Access number isn’t configured. To configure an Outlook Voice Access number, you first need to create the dial plan, and then configure an Outlook Voice Access number under the dial plan’s Outlook Voice Access option. Although an Outlook Voice Access number isn’t required, you need to configure at least one Outlook Voice Access number to enable a UM-enabled user to use Outlook Voice Access to access to their Exchange 2013 mailbox. You can configure multiple Outlook Voice Access numbers for a single dial plan.
* After you create a Unified Messaging (UM) auto attendant, incoming calls to an external telephone number that a human operator would ordinarily answer are answered by the auto attendant. Unlike with other Unified Messaging components, such as UM dial plans and UM IP gateways, you aren’t required to create UM auto attendants. However, auto attendants help internal and external callers locate users or departments that exist in an organization and transfer calls to them.
* Hunt group is a term used to describe a group of Private Branch eXchange (PBX) or IP PBX extension numbers that are shared by users. Hunt groups are used to efficiently distribute calls into or out of a specific business unit. Creating and defining a hunt group minimizes the chance that a caller who places an incoming call will receive a busy signal when the call is received. In a telephony network, a PBX or an IP PBX can be configured to have a single hunt group or multiple hunt groups. Each hunt group created on a PBX or IP PBX must have an associated pilot number. Using a pilot number helps to eliminate busy signals and to route incoming calls to the extension numbers that are available. The PBX or IP PBX uses the pilot number to locate the hunt group and in turn to locate the telephone extension number on which the incoming call was received and the extensions that are assigned to the hunt group. Without a defined pilot number, the PBX or IP PBX can’t locate where the incoming call was received.
Reference:
Create a UM Auto Attendant.

QUESTION 57
Drag and Drop Question
You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France. Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device. You need to ensure that callers to the France office can navigate the voice mail system menu in French. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
passleader-70-342-dumps-571

Answer:
passleader-70-342-dumps-572

QUESTION 58
You have an Exchange Server 2013 organization. You successfully migrate the public folders from a previous version of Exchange Server. You discover that one of the public folder mailboxes almost reached its quota size. You need to move some of the public folders in the public folder mailbox to another public folder mailbox. What should you run?

A.    Split-PublicFolderMailbox.ps1
B.    Set-MailPublicFolder
C.    Update-PublicFolderMailbox
D.    Set-PublicFolderMailbox

Answer: A
Explanation:
You can either perform a publicfoldermoverequest, or run the splitpublicfoldermailbox.ps1 script.
* Split-PublicFolderMailbox.ps1. Splits the given public folder mailbox based on the size of the folders.
* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.
Reference:
Move a Public Folder to a Different Public Folder Mailbox.

QUESTION 59
You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed. A user named User1 reports that he cannot access his mailbox because his account is locked out. You verify that the mailbox of User2 is hosted on Office 365. You need to unlock the account of User1. Which cmdlet should you run?

A.    Set-MailUser
B.    Set-MSolUser
C.    Set-Mailbox
D.    Set-ADUser

Answer: B
Explanation:
http://blogs.inframon.com/post/2012/08/07/Office-365-User-Account-Lockout.aspx

QUESTION 60
You have a hybrid deployment of Exchange Server 2013 and Office 365. The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server. Your company is assigned a new set of public IP addresses. A network administrator updates the external firewall address and all of the associated DNS records. Office 365 users report that they cannot receive email messages from on-premises users. You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server. You need to ensure that the on-premises users can send email messages successfully to the Office 365 users. Which tool should you use?

A.    The Exchange Management Console
B.    The Exchange Control Panel in Office 365
C.    The Exchange Admin Center
D.    The Exchange Remote Connectivity Analyzer

Answer: C
Explanation:
Note:
* The section describes the user interface elements that are common across the EAC (Exchange Admin Center).
passleader-70-342-dumps-601


Get the newest PassLeader 70-342 VCE dumps here: http://www.passleader.com/70-342.html (231 Q&As Dumps)

And, DOWNLOAD the newest PassLeader 70-342 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=0B-ob6L_QjGLpfnExREVzWWtnTGZYZDhiVm1ESjV2dkgwU09EOExRMloxUE95aUdnWC1lUU0