Valid 70-533 Dumps shared by PassLeader for Helping Passing 70-533 Exam! PassLeader now offer the newest 70-533 VCE dumps and 70-533 PDF dumps, the PassLeader 70-533 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader 70-533 dumps with VCE and PDF here: http://www.passleader.com/70-533.html (270 Q&As Dumps –> 358 Q&As Dumps –> 404 Q&As Dumps)
BTW, DOWNLOAD part of PassLeader 70-533 dumps from Cloud Storage: https://drive.google.com/open?id=0B-ob6L_QjGLpfnV3MVl6X3pXOWw1Z3YtQUpJRVRiTkNkbGNFbVBNRXhjSkw3bWk1WHdYcW8
You manage an Azure Service Bus for your company. You plan to enable access to the Azure Service Bus for an application named ContosoLOB. You need to create a new shared access policy for subscriptions and queues that has the following requirements:
– Receives messages from a queue
– Deadletters a message
– Defers a message for later retrieval
– Enumerates subscriptions
– Gets subscription description
In the table below, identify the permission you need to assign to ensure that ContosoLOB is able to accomplish the above requirements. Make only one selection in each column.
Your network includes a legacy application named LegacyApp1. The application only runs in the Microsoft .NET 3.5 Framework on Windows Server 2008. You plan to deploy to Azure Cloud Services. You need to ensure that LegacyApp1 will run correctly in the new environment. What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Upload a VHD with Windows Server 2008 installed.
B. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 2.
C. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 1.
D. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 3.
Guest OS Family 1 and Guest OS Family 2 supports .NET 3.5 and .Net 4.0. Guest OS Family 3 and Guest OS Family 4 supports .NET 4.0 and .Net 4.5.
Drag and Drop Question
You administer a cloud service named contosoapp that has a web role and worker role. Contosoapp requires you to perform an in-place upgrade to the service. You need to ensure that at least six worker role instances and eight web role instances are available when you apply upgrades to the service. You also need to ensure that updates are completed for all instances by using the least amount of time. Which value should you use with each configuration? To answer, drag the appropriate value to the correct configuration. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
You need to ensure that at least six worker role instances and eight web role instances are available when you apply upgrades to the service.
* You can decide whether you want to update all of the roles in your service or a single role in the service. In either case, all instances of each role that is being upgraded and belong to the first upgrade domain are stopped, upgraded, and brought back online. Once they are back online, the instances in the second upgrade domain are stopped, upgraded, and brought back online.
You migrate a Windows Server .NET web application to Azure Cloud Services. You need enable trace logging for the application. Which two actions should you perform? Each correct answer presents part of the solution.
A. Update the service definition file.
B. Update the Azure diagnostics configuration.
C. Update the service configuration file.
D. Enable verbose monitoring.
E. Update the application web.config file.
You can use Azure logging right out of the box–it’s part of Azure SDK.
A: Azure Service Definition Schema (.csdef File) The service definition file defines the service model for an application. The file contains the definitions for the roles that are available to a cloud service, specifies the service endpoints, and establishes configuration settings for the service.
B: Take Control of Logging and Tracing in Microsoft Azure The Microsoft.WindowsAzure.Diagnostics namespace, which inherits from and extends standard System.Diagnostics classes, enables the use of System.Diagnostics as a logging framework in Azure environment.
Drag and Drop Question
You plan to deploy a cloud service named contosoapp. The service includes a web role named contosowebrole. The web role has an endpoint named restrictedEndpoint. You need to allow access to restricted Endpoint only from your office machine using the IP address 184.108.40.206. Which values should you use within the service configuration file? To answer, drag the appropriate value to the correct location in the service configuration file. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
You manage a cloud service that utilizes an Azure Service Bus queue. You need to ensure that messages that are never consumed are retained. What should you do?
A. Check the MOVE TO THE DEAD-LETTER SUBQUEUE option for Expired Messages in the Azure Portal.
B. From the Azure Management Portal, create a new queue and name it Dead-Letter.
C. Execute the Set-AzureServiceBus PowerShell cmdlet.
D. Execute the New-AzureSchedulerStorageQueueJob PowerShell cmdlet.
The EnableDeadLetteringOnMessageExpiration property allows to enable\disable the dead-lettering on message expiration.
You manage a web application published to Azure Cloud Services. Your service level agreement (SLA) requires that you are notified in the event of poor performance from customer locations in the US, Asia, and Europe. You need to configure the Azure Management Portal to notify you when the SLA performance targets are not met. What should you do?
A. Create an alert rule to monitor web endpoints.
B. Create a Notification Hub alert with response time metrics.
C. Add an endpoint monitor and alert rule to the Notification Hub.
D. Configure the performance counter on the cloud service.
* An alert rule enables you to monitor an available metric within a supported Azure service. When the value of a specified metric violates the threshold assigned for a rule, the alert rule becomes active and registers an alert. When you create an alert rule, you can select options to send an email notification to the service administrator and co- administrators, or another administrator, when the rule becomes active, and when an alert condition is resolved.
* You can configure cloud service alert rules on:
– Web endpoint status metrics
– Monitoring metrics from the cloud service host operating system Performance counters collected from the cloud service guest virtual machine
You manage a cloud service that hosts a customer-facing application. The application allows users to upload images and create collages. The cloud service is running in two medium instances and utilizes Azure Queue storage for image processing. The storage account is configured to be locally redundant. The sales department plans to send a newsletter to potential clients. As a result, you expect a significant increase in global traffic. You need to recommend a solution that meets the following requirements:
– Configure the cloud service to ensure the application is responsive to the traffic increase.
– Minimize hosting and administration costs.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Configure the cloud service to run in two Large instances.
B. Configure the cloud service to auto-scale to three instances when processor utilization is above 80%.
C. Configure the storage account to be geo-redundant.
D. Deploy a new cloud service in a separate data center.
Use Azure Traffic Manager to load balance traffic between the cloud services.
E. Configure the cloud service to auto-scale when the queue exceeds 1000 entries per machine.
* An autoscaling solution reduces the amount of manual work involved in dynamically scaling an application. It can do this in two different ways: either preemptively by setting constraints on the number of role instances based on a timetable, or reactively by adjusting the number of role instances in response to some counter(s) or measurement(s) that you can collect from your application or from the Azure environment.
You manage a cloud service on two instances. The service name is Service1 and the role name is ServiceRole1. Service1 has performance issues during heavy traffic periods. You need to increase the existing deployment of Service1 to three instances. Which Power Shell cmdlet should you use?
A. PS C:\>Set-AzureService -ServiceName “Service1” -Label “ServiceRole1′ -Description “Instance count=3”
B. PS C:\>Set-AzureRole -ServiceName “Service1” -Slot “Production” -RoleName “ServiceRole1″ -Count 3
C. PS C:\>Add-AzureWebRole -Name ‘ServiceRole1” -Instances 3
D. PS C:\>$instancecount = New-Object Hashtable$settings[‘INSTANCECOUNT=3]
PS C:\>Set-AzureWebsite -AppSettings $instancecount ServiceRole1
The Set-AzureRole cmdlet sets the number of instances of a specified role to run in an Azure deployment. Example:
This command sets the “MyTestRole3” role running in production on the “MySvc1” service to three instances.
C:\PS>Set-AzureRole ServiceName “MySvc1” Slot “Production” RoleName
“MyTestRole3” Count 3
Drag and Drop Question
You plan to deploy a cloud service named contosoapp that has a web role named contosoweb and a worker role named contosoimagepurge. You need to ensure the service meets the following requirements:
– Contosoweb can be accessed over the Internet by using http.
– Contosoimagepurge can only be accessed through tcp port 5001 from contosoweb.
– Contosoimagepurge cannot be accessed directly over the Internet.
Which configuration should you use? To answer, drag the appropriate configuration setting to the correct location in the service configuration file. Each configuration setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Your company network includes two branch offices. Users at the company access internal virtual machines (VMs). You want to ensure secure communications between the branch offices and the internal VMs and network. You need to create a site-to-site VPN connection. What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. a private IPv4 IP address and a compatible VPN device
B. a private IPv4 IP address and a RRAS running on Windows Server 2012
C. a public-facing IPv4 IP address and a compatible VPN device
D. a public-facing IPv4 IP address and a RRAS running on Windows Server 2012
C (not A): VPN Device IP Address – This is public facing IPv4 address of your on-premises VPN device that you’ll use to connect to Azure. The VPN device cannot be located behind a NAT.
D (Not B): At least one or preferably two publicly visible IP addresses: One of the IP addresses is used on the Windows Server 2012 machine that acts as the VPN device by using RRAS. The other optional IP address is to be used as the Default gateway for out-bound traffic from the on-premises network. If the second IP address is not available, it is possible to configure network address translation (NAT) on the RRAS machine itself, to be discussed in the following sections. It is important to note that the IP addresses must be public. They cannot be behind NAT and/or a firewall.
You manage a large datacenter that has limited physical space. You plan to extend your datacenter to Azure. You need to create a connection that supports a multiprotocol label switching (MPLS) virtual private network. Which connection type should you use?
ExpressRoute provides even richer capabilities by allowing a dedicated MPLS connection to Azure.
You manage a cloud service named fabrikam Reports that is deployed in an Azure data center. You deploy a virtual machine (VM) named fabrikamSQL into a virtual network named fabrikamVNet. FabrikamReports must communicate with fabrikamSQL. You need to add fabrikam Reports to fabrikamVNet. Which file should you modify?
A. the network configuration file for fabrikamVNet
B. the service definition file (.csdef) for fabnkamReports
C. the service definition file (.csdef) for fabrikamSQL
D. the service configuration file (.cscfg) for fabrikamReports
E. the service configuration file (.cscfg) fabrikamSQL
Azure Service Definition Schema (.csdef File) The service definition file defines the service model for an application. The file contains the definitions for the roles that are available to a cloud service, specifies the service endpoints, and establishes configuration settings for the service.
not D, not E: The service configuration file (.cscfg) specifies the number of role instances to deploy for each role in the service, the values of any configuration settings, and the thumbprints for any certificates associated with a role.
You manage an application deployed to virtual machines (VMs) on an Azure virtual network named corpVnet1. You plan to hire several remote employees who will need access to the application on corpVnet1. You need to ensure that new employees can access corpVnet1. You want to achieve this goal by using the most cost effective solution. Which two actions should you perform? Each correct answer presents part of the solution.
A. Create a VPN subnet.
B. Enable point-to-point connectivity for corpVnet1.
C. Enable point-to-site connectivity for corpVnet1.
D. Create a gateway subnet.
E. Enable site-to-site connectivity for corpVnet1.
F. Convert corpVnet1 to a regional virtual network.
Add gateway subnet – The gateway subnet is required for a point-to-site VPN. Click to add the gateway subnet. The gateway subnet is used only for the virtual network gateway.
Drag and Drop Question
You have an Azure Virtual Network named fabVNet with three subnets named Subnet-1, Subnet-2 and Subnet-3. You have a virtual machine (VM) named fabVM running in the fabProd service. You need to modify fabVM to be deployed into Subnet-3. You want to achieve this goal by using the least amount of time and while causing the least amount of disruption to the existing deployment. What should you do? To answer, drag the appropriate Power Shell cmdlet to the correct location in the Power Shell command. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
You manage an Azure Web Site named contosoweb. Some users report that they receive the following error when they access contosoweb: “http Status 500.0 – Internal Server Error.” You need to view detailed diagnostic information in XML format. Which option should you enable? To answer, select the appropriate option in the answer area.
Request-based tracing is available both in stand-alone IIS Servers and on Windows Azure Web Sites (WAWS) and provides a way to determine what exactly is happening with your requests and why, provided that you can reproduce the problem that you are experiencing. Problems like poor performance on some requests, or authentication-related failures on other requests, or the server 500 error from ASP or ASP.NET can often be difficult to troubleshoot–unless you have captured the trace of the problem when it occurs.
Drag and Drop Question
You manage an Azure Web Site named contososite. You download the subscription publishing credentials named Contoso-Enterprise.publishsettings. You need to use Azure Power Shell to achieve the following:
– Connect to the Contoso-Enterprise subscription.
– Create a new App Setting named CustomSetting with a value of True.
– Restart the website.
Which commands should you use? To answer, drag the appropriate Azure PowerShell command to the correct location in the solution. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Get the newest PassLeader 70-533 VCE dumps here: http://www.passleader.com/70-533.html (270 Q&As Dumps –> 358 Q&As Dumps –> 404 Q&As Dumps)
And, DOWNLOAD the newest PassLeader 70-533 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=0B-ob6L_QjGLpfnV3MVl6X3pXOWw1Z3YtQUpJRVRiTkNkbGNFbVBNRXhjSkw3bWk1WHdYcW8