Valid 70-243 Dumps shared by PassLeader for Helping Passing 70-243 Exam! PassLeader now offer the newest 70-243 VCE dumps and 70-243 PDF dumps, the PassLeader 70-243 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader 70-243 dumps with VCE and PDF here: http://www.passleader.com/70-243.html (185 Q&As Dumps)
BTW, DOWNLOAD part of PassLeader 70-243 dumps from Cloud Storage: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc
QUESTION 121
Your network contains a single Active Directory domain named contoso.com. The domain contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. The relevant servers are configured as shown in the following table.
The Configuration Manager deployment has an Exchange Server connector. You use Configuration Manager to manage all mobile devices. The mobile devices do not have the Configuration Manager client installed. The Exchange Server settings control which Windows Phone devices can use Exchange ActiveSync. A corporate security policy requires that iOS devices have version 8.0 or later to use Exchange ActiveSync. You need to configure which iPhone devices can access Exchange ActiveSync. What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
A. Modify the synchronization settings of the Exchange Server connector.
B. Add access rules to Server1.
C. Modify the security settings of the Exchange Server connector.
D. Modify the external mobile device management setting on Server2.
E. Add access rules to Server2.
F. Modify the external mobile device management setting on Server1.
Answer: CF
Explanation:
How to Manage Mobile Devices by Using Configuration Manager and Exchange.
https://technet.microsoft.com/en-us/library/gg682001.aspx
QUESTION 122
You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You have a configuration item named Item1 that has two revisions. The current revision is not referenced by any configuration baselines. You need to reconfigure Item1 to use the previous settings, and then you must modify the detection method of Item1. What should you do?
A. Restore the previous version. Modify revision 2.
B. Restore the previous version. Modify revision 1.
C. Delete the current version. Modify revision 1.
D. Copy the previous version. Modify revision 2.
Answer: B
QUESTION 123
Hotspot Question
You deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to a server named Server1. Configuration Manager manages all of the client computers, including a computer named Client1. A hardware inventory cycle is initiated on Client1. You need to identify which Inventory classes were collected on Client1 and when the inventory was added to the site database. Which log files should you review? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 124
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You deploy a Microsoft Office 2010 package to all client computers by using Configuration Manager. Your company purchases Office 2013. You need to ensure that all users can install Office 2013 from the Application Catalog. What should you do?
A. Deploy a new application for Office 2013.
B. Deploy a new package for Office 2013.
C. Deploy Office 2013 by using a Group Policy Object (GPO).
D. Update the Office 2010 source file and redeploy the package.
Answer: A
Explanation:
How-to: Deploying Microsoft Office 2013 using SCCM 2012.
https://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
QUESTION 125
You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. Configuration Manager has Network Access Protection (NAP) configured. All Configuration Manager servers reside on the internal network. You use Configuration Manager to deploy applications and software updates to intranet clients. Corporate security policies prevent the use of reverse proxies. You need to configure Configuration Manager to manage Internet-based clients. Which three additional Configuration Manager roles should you deploy? Each correct answer presents part of the solution.
A. secondary site server
B. Management point
C. Software update point
D. Distribution point
E. System Health Validator point
F. Endpoint Protection point
Answer: BCD
Explanation:
B:
In the Internet MP properties, make sure that HTTPS is enabled (checked), and depending upon your requirement, that either “Allow Internet-only connections” or “Allow Internet and Intranet connections” is checked.
BCD:
Because of the higher security requirements of managing client computers on a public network, Internet Based Client Management requires that the site is using certificates. This ensures that connections to the management point, software update point and distribution points are authenticated by an independent authority, and that data to and from these site systems is encrypted using Secure Sockets Layer (SSL).
Reference: A closer look at Internet Based Client Management in ConfigMgr 2012.
http://blogs.technet.com/b/configurationmgr/archive/2013/12/11/a-closer-look-at-internet-based-client-management-in-configmgr-2012.aspx
QUESTION 126
You network has System Center Configuration Manager 2007 R3 deployed. The Active Directory schema is extended for System Center Configuration Manager 2007 R3. You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to a new server. You need to ensure that System Center 2012 R2 Configuration Manager SP1 can publish information to Active Directory. Which container’s permissions should you modify?
A. System\Policies
B. System\IP Security
C. System\System Management
D. System\WMIPolicy
Answer: C
Explanation:
The Publishing Status shown in the Active Directory Forests list view is a status summary of all sites in the hierarchy. The status will show ‘Failed’ if any sites in the hierarchy failed to publish to the forest. To view published site information, open Active Directory Users and Computers, connect to a domain controller in the forest, and go to View -> Advanced Features. Site and management point information is published under the System -> System Management node.
Reference: Active Directory Forest Discovery and Publishing in Configuration Manager 2012 Beta 2.
http://blogs.technet.com/b/configmgrteam/archive/2011/03/30/active-directory-forest-discovery-and-publishing-in-configuration-manager-2012-beta-2.aspx
QUESTION 127
Drag and Drop Question
You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment that contains the servers configured as shown in the following table.
You need to ensure that Server3, Server4, and Server5 can be used to deploy software updates to Configuration Manager clients. The Configuration Manager clients in the primary site must be able to receive updates if one of the WSUS servers becomes unavailable. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION 128
You manage s System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. You need to ensure that Configuration Manager clients can use the Application Catalog. Which client settings should you configure?
A. Software Metering
B. Computer Agent
C. Software Deployment
D. Software Inventory
Answer: B
QUESTION 129
You have a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) deployment. You have two configuration baselines named CB1 and CB2 has a configuration item that verifies whether Remote Desktop is enabled CB1 is deployed to a device collection named collection1. CB2 uses CB1 as an evaluation condition. You need to ensure that you can delete CB1. What should you modify before you delete CB1?
A. The evaluation conditions of CB2
B. The collections to which CB1 is deployed
C. The configuration item of CB1
D. The evaluation conditions of CB1
Answer: A
QUESTION 130
Drag and Drop Question
You manage a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) stand-alone primary site that contains a software update point. You need to implement a configuration baseline that will contain a software updates configuration item. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer: ……
QUESTION 131
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. The environment contains a single primary site. You need to provide users with the ability to remotely reset their mobile device to the factory settings. Which two components should you install? Each correct answer presents part of the solution.
A. out of band service point
B. System Health Validator point
C. Application Catalog web service point
D. device management point
E. Application Catalog website point
Answer: CE
QUESTION 132
You have a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) deployment. You have the following types of mobile devices:
– Windows 8.1
– Android 5.0
– IOS 7
You plan to use Configuration Manager to manage the mobile devices. You need to recommended a solution to deploy VPN profiles and WI-Fi profiles to the mobile devices.
A. an enrolment point
B. a Microsoft Intune subscription
C. an exchange server connector
D. a Cloud distribution point
Answer: B
QUESTION 133
You manage a System center 2012 R2 configuration Manager Service Pack 1 (SP1) deployment. The deployment contains a reporting services point. You subscribe to all client status reports. You need to subscribe to an Asset Intelligence report. From where should you configure the subscription?
A. the Administration workspace from the Configuration Manager Console
B. the Report Manager site
C. the Software Library workspace from the Configuration Manager Console
D. SQL Server Configuration Manager
Answer: C
QUESTION 134
You manage a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) stand-alone primary site that includes the servers configured as shown in the following table.
You need to provide a user named User1 with the ability to run reports. What should you do?
A. On Server2, modify the permission of the reporting services folder by using Report Manager.
B. On Server2, modify the Configuration Report Users security role by using Report Managers.
C. On Server3, modify the database permission by using SQL server Management Studio.
D. On Server1, assign user1 a security role by using the Configuration Manager Console.
Answer: D
QUESTION 135
Hotspot Question
You have a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) stand-alone primary site. You have a line-of-business application named App1. You need to deploy App1 to Configuration Manager clients to meet the following requirements:
– The number of deployments created in Configuration Manager must be minimized.
– If users are logged on to their primary computer, App1 must be deployed by using a Windows Installer (MSI) package.
– If users are logged to a computer other than their primary computer, App1 must be deployed by using Microsoft Application Virtualization (App-v).
In Configuration Manager, create:
Answer:
One Application and two deployment types
A requirement from the user category
Get the newest PassLeader 70-243 VCE dumps here: http://www.passleader.com/70-243.html (185 Q&As Dumps)
And, DOWNLOAD the newest PassLeader 70-243 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc