Valid SC-200 Dumps shared by PassLeader for Helping Passing SC-200 Exam! PassLeader now offer the newest SC-200 VCE dumps and SC-200 PDF dumps, the PassLeader SC-200 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader SC-200 dumps with VCE and PDF here: https://www.passleader.com/sc-200.html (406 Q&As Dumps)
BTW, DOWNLOAD part of PassLeader SC-200 dumps from Cloud Storage: https://drive.google.com/drive/folders/1D7sX6DDpE-AaGl4QV9bMBXnyAbBcL2CE
NEW QUESTION 381
You have a Microsoft 365 subscription. You have 1,000 Windows devices that have a third-party antivirus product installed and Microsoft Defender Antivirus in passive mode. You need to ensure that the devices are protected from malicious artifacts that were undetected by the third-party antivirus product.
Solution: You configure Controlled folder access.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
Configuring Controlled Folder Access does not meet the goal. Controlled Folder Access is a feature of Microsoft Defender Antivirus that protects specific folders from unauthorized changes by ransomware or other malicious apps. However, this feature requires Microsoft Defender Antivirus to be active and does not address the scenario where Defender Antivirus is in passive mode due to the presence of a third-party antivirus. To meet the goal of protecting the devices from malicious artifacts undetected by the third-party antivirus, you should enable EDR in block mode. EDR in block mode works even when Microsoft Defender Antivirus is in passive mode, allowing Microsoft Defender for Endpoint to remediate threats missed by the third-party antivirus. Thus, configuring Controlled Folder Access is not the correct solution in this scenario.
NEW QUESTION 382
You have an Azure subscription that uses Microsoft Defender XDR. From the Microsoft Defender portal, you perform an audit search and export the results as a file named File1.csv that contains 10,000 rows. You use Microsoft Excel to perform Get & Transform Data operations to parse the AuditData column from File1.csv. The operations fail to generate columns for specific JSON properties. You need to ensure that Excel generates columns for the specific JSON properties in the audit search results.
Solution: From Excel, you apply filters to the existing columns in File1.csv to reduce the number of JSON properties, and then you perform the Get 8t Transform Data operations to parse the AuditData column.
Does this meet the requirement?
A. Yes
B. No
Answer: B
Explanation:
No, this solution will not ensure that Excel generates columns for specific JSON properties in the AuditData column. Applying filters in Excel will only help reduce data quantity but won’t address the issue of correctly parsing the JSON data in the AuditData column into separate columns for each JSON property.
NEW QUESTION 383
You have a Microsoft 365 subscription that uses Microsoft Defender XDR. You discover that when Microsoft Defender for Endpoint generates alerts for a commonly used executable file, it causes alert fatigue. You need to tune the alerts. Which two actions can an alert tuning rule perform for the alerts? (Each correct answer presents a complete solution. Choose two.)
A. delete
B. hide
C. resolve
D. merge
E. assign
Answer: BC
Explanation:
– Hide : This action allows you to hide alerts generated by the specified executable file, reducing the noise and alert fatigue. These hidden alerts will not appear in the incident queue but will still be logged for historical purposes.
– Resolve : This action automatically resolves alerts generated by the specified executable file. The alerts are marked as resolved, indicating that no further action is required. This helps in managing alert fatigue by automatically handling known benign alerts.
NEW QUESTION 384
You have a Microsoft 365 subscription that uses Microsoft Defender XDR. You need to implement deception rules. The solution must ensure that you can limit the scope of the rules. What should you create first?
A. device groups
B. device tags
C. honeytoken entity tags
D. sensitive entity tags
Answer: B
Explanation:
When configuring a deception role there’s no option to use a device group, only device tags.
https://learn.microsoft.com/en-us/defender-xdr/configure-deception
NEW QUESTION 385
You have a Microsoft 365 subscription that uses Microsoft Defender XDR. You are investigating an incident. You need to review the incident tasks that were performed. The solution must include a query that will display the incidents in a workbook, and then display the tasks of each incident in another grid. Which table should you target in the query?
A. SecurityIncident
B. SecurityEvent
C. SentinelAudit
D. SecurityAlert
Answer: A
Explanation:
The SecurityIncident table in Microsoft Sentinel contains information about incidents, including details such as incident ID, severity, status, and tasks.
NEW QUESTION 386
You have a Microsoft 365 E5 subscription that uses Microsoft Copilot for Security. Copilot for Security has the default settings configured. You need to ensure that a user named User can use Copilot for Security to perform the following tasks:
– Upload files.
– View the usage dashboard.
– Share promptbooks with all users.
The solution must follow the principle of least privilege. Which role should you assign to User?
A. Copilot Owner
B. Cloud Application Administrator
C. Security Administrator
D. Copilot Contributor
Answer: A
Explanation:
https://learn.microsoft.com/en-us/copilot/security/authentication
NEW QUESTION 387
You have a Microsoft 365 E5 subscription that contains two groups named Group1 and Group2 and uses Microsoft Copilot for Security. You need to configure Copilot for Security role assignments to meet the following requirements:
– Ensure that members of Group1 can run prompts and respond to Microsoft Defender XDR security incidents.
– Ensure that members of Group2 can run prompts.
– Follow the principle of least privilege.
You remove Everyone from the Copilot Contributor role. Which two actions should you perform next? (Each correct answer presents part of the solution. Choose two.)
A. Assign the Security Operator role to Group1.
B. Assign the Copilot Owner role to Group2.
C. Assign the Copilot Owner role to Group1.
D. Assign the Security Operator role to Group2.
E. Assign the Copilot Contributor role to Group2.
Answer: AE
NEW QUESTION 388
You have a Microsoft 365 E5 subscription that contains a device named Device1. From the Microsoft Defender portal, you discover that an alert was triggered for Device1. From the Device inventory page, you isolate Device1. You need to collect a list of installed programs on Device1. What should you do?
A. Run an advanced hunting query against the DeviceProcessEvents table.
B. Run an advanced hunting query against the DeviceTvmSoftwareInventory table.
C. Initiate an automated investigation and view the results in the Action center.
D. Initiate a live response session and run the processes command.
Answer: C
NEW QUESTION 389
You have a Microsoft 365 subscription that contains a user named User1 and two Windows devices named Device1 and Device2. Device1 and Device2 are onboarded to Microsoft Defender for Endpoint. The following events occur:
– User1 signs in to Device1.
– Automatic attack disruption in Microsoft Defender XDR responds to an attack on Device1 and contains User1.
– User1 attempts to connect to Device2.
Which protocols will Device2 block when User1 attempts to connect to Device2?
A. RDP only.
B. RPC only.
C. SMB only.
D. RDP and RPC only.
E. SMB and RPC only.
F. RDP, RPC, and SMB.
Answer: F
NEW QUESTION 390
You have an Azure subscription that contains a Microsoft Sentinel workspace named WS1. WS1 has the Azure Activity connector and the Microsoft Entra ID connector configured. You need to investigate which accounts have the most alerts and any corresponding incident information for each alert. The solution must minimize administrative effort. What should you do first in WS1?
A. Use User and Entity Behavior Analytics (UEBA) to detect anomalies.
B. Enable User and Entity Behavior Analytics (UEBA).
C. From Content hub, install the Microsoft Purview insider risk management solution.
D. From Content hub, install Cloud Identity Threat Protection Essentials.
Answer: B
NEW QUESTION 391
You have a Microsoft 365 E5 subscription that uses Microsoft Defender XDR. You are investigating an incident. You need to review the incident tasks that were performed. What can you use on the Incident page?
A. Tasks only.
B. Tasks and Activity log only.
C. Tasks and Alert timeline only.
D. Tasks, Activity log, and Alert timeline.
Answer: D
Explanation:
https://learn.microsoft.com/en-us/azure/sentinel/investigate-incidents
NEW QUESTION 392
You have a Microsoft 365 E5 subscription that uses Microsoft Copilot for Security. You start a Copilot for Security session and enter five prompts that each provide responses. You need to create a promptbook that will use the prompts but will NOT contain the responses. The solution must minimize administrative effort. What should you do?
A. Select each prompt, and then select Create promptbook.
B. Create a new promptbook and include each prompt.
C. Enter a new prompt that has the following input: Create a promptbook from my session prompts.
D. Share the session, and then select Create promptbook.
Answer: A
Explanation:
Inside a session, select each prompt you want and then create the promptbook.
https://learn.microsoft.com/en-us/copilot/security/build-promptbooks#create-a-promptbook-from-an-existing-session
NEW QUESTION 393
You have 1,000 on-premises Windows 11 Pro devices that are onboarded to Microsoft Defender for Endpoint. You have a Microsoft 365 subscription that uses Microsoft Defender XDR. You identify that an attacker performed the following actions on a device:
– Modified the filesystem path of a registry-based antivirus exclusion.
– Downloaded a malicious file to the file system path.
You initiate a live response session on the device. You need to undo the registry change. Which command should you run?
A. remediate
B. registry
C. scan
D. analyze
Answer: A
Explanation:
https://learn.microsoft.com/en-us/defender-endpoint/live-response
NEW QUESTION 394
You have a Microsoft 365 E5 subscription. You need to configure Microsoft Defender XDR automatic attack disruption to use signals generated by Microsoft Defender for Cloud Apps. Which two actions should you perform for Defender for Cloud Apps in the Microsoft Defender portal? (Each correct answer presents part of the solution. Choose two.)
A. Enable the Microsoft 365 connector.
B. Add a log collector for automatic log upload.
C. Turn on app governance.
D. Deploy Cloud Discovery user enrichment.
E. From Information protection, enable file monitoring.
Answer: AC
NEW QUESTION 395
You have a Microsoft 365 E5 subscription. You need to ensure that an alert is generated in Microsoft Defender XDR when attackers attempt to connect to a specific device. The solution must minimize administrative effort. What should you do in the Microsoft Defender portal?
A. Create a deception rule that includes a decoy.
B. Tag an existing device as a honeytoken entity.
C. Create a deception rule that includes a lure.
D. Tag an existing device as a sensitive entity.
Answer: D
NEW QUESTION 396
You have a Microsoft 365 subscription that uses Microsoft Copilot for Security. You create a promptbook named Book1. For Book1, you need to create a prompt that contains an input named IncidentID. How should you format IncidentID?
A. {{IncidentID}}
B. ##IncidentID##
C. [IncidentID]
D. $IncidentID$
Answer: A
NEW QUESTION 397
HotSpot
You have an Azure subscription named Sub1. Sub1 contains a Microsoft Sentinel workspace named SW1 and a virtual machine named VM1 that runs Windows Server. SW1 collects security logs from VM1 by using the Windows Security Events via AMA connector. You need to limit the scope of events collected from VM1. The solution must ensure that only audit failure events are collected. How should you complete the filter expression for the connector? (To answer, select the appropriate options in the answer area.)
Answer:
NEW QUESTION 398
HotSpot
You have an Azure subscription named Sub1 that is linked to a Microsoft Entra tenant named contoso.com. Contoso.com contains a user named User1. Sub1 contains a Microsoft Sentinel workspace. You provision a Microsoft Copilot for Security capacity. You need to ensure that User1 can use Copilot for Security to perform the following tasks:
– Update the data sharing and feedback options.
– Investigate Microsoft Sentinel incidents.
The solution must follow the principle of least privilege. Which role should you assign to User1 for each task? (To answer, select the appropriate options in the answer area.)
Answer:
NEW QUESTION 399
HotSpot
You have a Microsoft 365 E5 subscription that uses Microsoft Defender XDR. You discover a malicious process that was initiated by a file named File1.exe on a device named Device1. You need to create a KQL query that will identify when File1.exe was created. The solution must meet the following requirements:
– Return the FileName, InitiatingProcessFileName, and InitiatingProcessCommandLine columns.
– Minimize the volume of data returned.
How should you complete the query? (To answer, select the appropriate options in the answer area.)
Answer:
NEW QUESTION 400
Drag and Drop
You have an on-premises Windows 11 Pro device named Device1 that is onboarded to Microsoft Defender for Endpoint. You have a Microsoft 365 subscription. You need to identify the processes running on Device1 and which network connections the processes have open. The solution must minimize administrative effort. Which four actions should you perform in the Microsoft Defender portal in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
NEW QUESTION 401
Drag and Drop
You have an Azure subscription that contains a Microsoft Sentinel workspace. You need to create and customize a workbook for the Microsoft Entra ID Audit Logs. Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
NEW QUESTION 402
……
Get the newest PassLeader SC-200 VCE dumps here: https://www.passleader.com/sc-200.html (406 Q&As Dumps)
And, DOWNLOAD the newest PassLeader SC-200 PDF dumps from Cloud Storage for free: https://drive.google.com/drive/folders/1D7sX6DDpE-AaGl4QV9bMBXnyAbBcL2CE