[11-May-2022 Update] Exam MB-330 VCE Dumps and MB-330 PDF Dumps from PassLeader

Valid MB-330 Dumps shared by PassLeader for Helping Passing MB-330 Exam! PassLeader now offer the newest MB-330 VCE dumps and MB-330 PDF dumps, the PassLeader MB-330 exam questions have been updated and ANSWERS have been corrected, get the newest PassLeader MB-330 dumps with VCE and PDF here: https://www.passleader.com/mb-330.html (303 Q&As Dumps –> 404 Q&As Dumps)

BTW, DOWNLOAD part of PassLeader MB-330 dumps from Cloud Storage: https://drive.google.com/drive/folders/165CCMnyUcc-b8VIeIa7JATDYfqg6SkE5

NEW QUESTION 276
A company plans to create a product that contains multiple bill of materials (BOM) levels. The product has several components that have both constant and variable costs. You need to calculate the planned cost for producing the product with manufacturing volumes. Which explosion mode should you select?

A.    Multilevel.
B.    Make to order.
C.    Single level.
D.    According to BOM line type.

Answer: A
Explanation:
https://www.dynamicsuser.net/t/make-to-order-or-bom-line-type-in-ax/42605

NEW QUESTION 277
An engineering department designs a bill of materials (BOM) for a new finished good. The finished good must be sold with a 30 percent markup of the BOM cost. You need to define the sales price for the finished good. What should you set up on the cost group?

A.    Profit setting percentage.
B.    Cost group Behavior.
C.    Cost group type Direct materials.
D.    Cost group type Indirect.
E.    Cost group type Undefined.

Answer: A
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/cost-groups

NEW QUESTION 278
A company needs to be alerted when the calculated planned cost of a bill of materials (BOM) product is older than 30 days. You need to configure the number of days validation in the system. Where should you specify the number of days?

A.    Cost price model.
B.    Stop explosion.
C.    Inventory and warehouse management parameters.
D.    BOM calculation groups.
E.    Released product.

Answer: D

NEW QUESTION 279
A manufacturing company uses Planning Optimization. Manned production orders are created, modified, and approved by the planner but are not yet firmed. What is the effect on the planned production orders when you enable the Planning Optimization feature?

A.    Modifications are ignored when Planning Optimization is run again.
B.    Modifications are included when Planning Optimization is run again.
C.    Approved orders are automatically firmed.
D.    Approved orders are set to unprocessed.
E.    Approved orders are set to completed.

Answer: B
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/purchase-trade-agreement

NEW QUESTION 280
A company uses Planning Optimization as a scheduled batch job every Friday. A buyer observes that there are unposted inventory cycle counts left over from a weekend physical inventory count. The buyer decides to cancel the Planning Optimization job, post the cycle counts, and run the job again. Where should the buyer cancel the job?

A.    Recurring integration scheduler (RIS).
B.    Batch group.
C.    Feature management.
D.    Job history.
E.    Lifecycle Services (LCS).

Answer: D
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/cancel-planning-job

NEW QUESTION 281
A single master plan is run with no filters applied. Buyer1 is reviewing and approving planned orders that were created by Planning Optimization. Buyer2 runs the same master plan again while Buyer1 is still reviewing planned orders. What are the two outcomes on Buyer1’s planned orders? (Each correct answer presents a complete solution. Choose two.)

A.    Approved planned orders remain unchanged.
B.    Approved planned orders recalculate.
C.    Completed planned orders remain unchanged.
D.    Completed planned orders recalculate.
E.    Unprocessed orders do not recalculate.

Answer: CD

NEW QUESTION 282
A company uses Planning Optimization. A customer calls a service agent at the company and asks about product availability dates when placing an order. Capable to promise (CTP) is initiated from the customer’s order. What is the expected output?

A.    An error occurs because CTP is not supported when Planning Optimization is enabled.
B.    Built-in master planning runs the calculation if the master plan has a separate dynamic master plan specified.
C.    A warning shows in the plan history log.
D.    CTP runs if add-ins are installed from Feature management.
E.    CTP calculates if all Planning Optimization jobs are withheld from batch scheduling.

Answer: A
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/planning-optimization-trouble-shooting

NEW QUESTION 283
You plan to use Planning Optimization. You configure a receipt margin. How is the receipt margin applied?

A.    from the issue date and backward from the receipt delivery date
B.    from the receipt delivery date and forward from the requirement date
C.    from the receipt delivery date and backward from the requirement date
D.    from the issue date and backward from the requirement date
E.    from the purchase trade agreement from date and backward from the requirement date

Answer: C

NEW QUESTION 284
A company classifies items as A, B, C, and D for planning purposes. You run Planning Optimization for the C items with the following setup:
– a plan filter for the A, B, and D items
– a runtime filter for the C items
The Planning Optimization output does not create any planned orders. You need to produce results in Planning Optimization for the C items without affecting the A, B, and D items. What should you do?

A.    Add the C items to the existing plan filter for the A, B, and D items. Set up a runtime filter for the A, B, and D items.
B.    Create a master plan with plan filter for the C items only. Do not set up a runtime filter for C items.
C.    Create a master plan with no plan filter or runtime filter. Add an advanced filter for the C items on the planned orders.
D.    Create a dynamic plan and a static plan. Do not set up plan filters or runtime filters.
E.    Retain the existing plan filter for the A, B, and D items. Set up a runtime filter for the A and C items.

Answer: C

NEW QUESTION 285
A company is considering using Planning Optimization instead of Master Planning. What are two architectural benefits when using Planning Optimization? (Each correct answer presents a complete solution. Choose two.)

A.    occurs inside Dynamics 365 Supply Chain Management
B.    reduces the load on Azure Data Lake
C.    has minimal impact on the SQL database
D.    minimizes server load
E.    allows for BYOD (Bring your own database)

Answer: CD
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/planning-optimization-overview

NEW QUESTION 286
A company uses Planning Optimization and first in, first out (FIFO) inventory valuation. The company also has special requirements on sales margins. Company policy states that marking must be a single issue that is fully marked against a single receipt, regardless of quantity. What should you do to respect marking when planned orders are being firmed?

A.    Allow negative inventory.
B.    Enable Ordered Reserved.
C.    Set the Update marking parameter to Extended.
D.    Set the Update marking parameter to Standard.
E.    Set the Update marking parameter to No.

Answer: B

NEW QUESTION 287
A company is considering using Planning Optimization instead of the built-in master planning engine. What are three benefits of Planning Optimization? (Each correct answer presents a complete solution. Choose three.)

A.    It is a multitenant service.
B.    It has multiple instances.
C.    It is hyper scalable.
D.    It has a single instance.
E.    It is single threaded.

Answer: ACE

NEW QUESTION 288
A company uses Planning Optimization. You need to ensure that the purchase price trade agreement lead time is used for an item. What should you do?

A.    Set the days forward parameter.
B.    Set the Disregard lead time parameter to No.
C.    Set the Disregard lead time parameter to Yes.
D.    Override the item lead time parameter.
E.    Set the days backward parameter.

Answer: B

NEW QUESTION 289
A company performs internal inspections of a specific product before releasing the products. This task adds two days for product handling once the product is in the warehouse. This process leads to delays in shipping. You need to resolve the issues. What should you change?

A.    Reorder margin.
B.    Minimum order quantity.
C.    Receipt margin.
D.    Maximum order quantity.
E.    Issue margin.

Answer: D
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/safety-margins

NEW QUESTION 290
A company enables purchase trade agreements for Planning Optimization. You need to be able to evaluate purchase trade agreements. Which three configurations must be set up? (Each correct answer presents part of the solution. Choose three.)

A.    Find trade agreement.
B.    Search criterion.
C.    Agreements marked as effective.
D.    Purchase agreements with status of confirmed.
E.    Activate price/discount.

Answer: ABE
Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/purchase-trade-agreement

NEW QUESTION 291
A buyer reviews the orders generated by Planning Optimization. The buyer observes that the output for some orders appears incorrect. The buyer reviews the history and planning logs. Which two types of information are in the history and planning logs? (Each correct answer presents part of the solution. Choose two.)

A.    list of planned orders created
B.    start time a job was run and the status
C.    additional information and warnings
D.    end time a job stopped and the status
E.    list of planned orders with firm history

Answer: BC
Explanation:
https://docs.microsoft.com/en-us/learn/modules/work-costing-sheet-dyn365-supply-chain-mgmt/
https://docs.microsoft.com/en-us/learn/modules/planning-optimization/

NEW QUESTION 292
A company is evaluating sales pricing strategies in a costing version of a bill of materials (BOM) product that will use a cost-plus-markup strategy. You need to configure the system to provide three prices based on different profit models. Where should you configure the markup values?

A.    Released product.
B.    Inventory model group.
C.    BOM calculation group.
D.    BOM version.
E.    Cost group.

Answer: C

NEW QUESTION 293
A company requires that a percentage of the building overhead costs as well as a percentage of overall labor must be added to a costing sheet for each item. The company also requires that the labor and overhead costs be calculated independently and then rolled up to a total amount. Which three actions should you perform to meet the requirements? (Choose three.)

A.    Select Cost group type as a node.
B.    Create indirect cost subnodes.
C.    Define the costing sheet format.
D.    Define the rate amount on the node.
E.    Define the rate amount on the cost group.

Answer: ACD

NEW QUESTION 294
A manufacturing company uses standard costs for raw materials. The company opens a new manufacturing location that will have different standard costs for the raw materials. The differences in costs must be reflected on the finished goods. You need to configure the site setup for the different costs. Which two configurations can be set up? (Choose two.)

A.    Costing version Recording tab.
B.    Item default order setting.
C.    Define site on BOM lines.
D.    Pending cost lines.
E.    Active cost lines.

Answer: CE

NEW QUESTION 295
You run Planning Optimization. You create a static master plan with a plan filter for A and B items. Purchasing agents for the A items start to review the A item output. You must re-run planning for the B items due to a change. Re-running the B items must not impact the existing planned orders for the A items. You need to re-run planning for the B items. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A.    Re-run the static plan with the runtime filter set for the A items.
B.    Delete the planned orders for the B items and re-run the static plan.
C.    Run a dynamic plan with a plan filter for the B items.
D.    Run a dynamic plan with a plan filter for the A items.
E.    Re-run the static plan with the runtime filter set for the B items.

Answer: CD

NEW QUESTION 296
A buying agent is evaluating vendors for sourcing an item. Prices and lead times vary by vendor. The buyer requires that the planning engine be set up to provide the best price while considering the lead time. Manual correction must not be required after planned purchase orders have been created. Which two actions should you perform to meet the requirements? (Each correct answer presents part of the solution. Choose two.)

A.    Use Planning Optimization.
B.    Use built-in master planning.
C.    Set Purchase trade agreements.
D.    Set the default vendor on the item.
E.    Set the override lead times on the item to yes.

Answer: CD

NEW QUESTION 297
A company decides to implement Planning Optimization. Company auditors need to know where the service will run physically once it is enabled for Dynamics 365 Supply Chain Management. In which location will the service run?

A.    on-premises at the company
B.    on the same SQL server as the Dynamics 365 Supply Chain Management instance
C.    in any data center, regardless of where the Dynamics 365 Supply Chain Management instance exists
D.    in the same data center country or region as the Dynamics 365 Supply Chain Management instance
E.    in the Microsoft Dataverse

Answer: B

NEW QUESTION 298
A company uses the built-in master planning engine but plans to use Planning Optimization instead. You enable auto-firming. You need to ensure that planned orders are firmed within the current month. What should you do?

A.    Set the firming time fence to one month plus issue margin.
B.    Set the firming time fence to one month plus receipt margin.
C.    Set the firming time fence to one month plus lead lime rf the lead time is greater than one week.
D.    Set the firming time fence to one month.
E.    Set the firming time fence to one week plus lead time if the lead time is less than one week.

Answer: D

NEW QUESTION 299
You are setting up safety margins. Which unit of measure is used to represent safety margins in planning optimization calculations?

A.    Period
B.    Month
C.    Week
D.    Day

Answer: D

NEW QUESTION 300
A manufacturing company produces finished goods that contain raw materials that are costed using first-in, You need to set up a costing version to support planned costs of the finished goods. What should you configure in the costing version?

A.    costing type to standard and block activation to yes
B.    costing type to planned and block activation to yes
C.    costing type to planned and block activation to no
D.    costing type to standard and block activation to no

Answer: C

NEW QUESTION 301
……


Get the newest PassLeader MB-330 VCE dumps here: https://www.passleader.com/mb-330.html (303 Q&As Dumps –> 404 Q&As Dumps)

And, DOWNLOAD the newest PassLeader MB-330 PDF dumps from Cloud Storage for free: https://drive.google.com/drive/folders/165CCMnyUcc-b8VIeIa7JATDYfqg6SkE5